Weldmark MP200 Inverter Multiprocess Welder
The Weldmark MP220 Inverter Multiprocess Welder is a dual voltage, portable DC inverter wire feed welder capable of welding with solid or flux core wire.
The Weldmark MP220 Inverter Multiprocess Welder is a dual voltage, portable DC inverter wire feed welder capable of welding with solid wire (with shielding gas) or with flux core wire. It comes ready to accept an optional Spool Gun for welding aluminum. This machine also has smooth DC stick capabilities and the ability to perform lift start DC TIG welding on steel and stainless steel materials with the optional TIG Torch. This Weldmark MP 220 is capable of MIG welding 5/16ʺ steel in a single pass while using 220V input power (3/16” steel when using 120V input power). It uses leading edge Inverter Technology to provide high quality welds that are crisp, clean, and consistent with plenty of power that will impress the most experienced of welders. One of the many advantages of inverter technology is creating more welding power from a smaller transformer. Stick weld with electrodes up to 5/32ʺ with this exceptionally smooth DC stick welding output. Stick weld on materials such as steel, stainless steel, cast iron, hard facing and aluminum. Typical applications for include home/hobbyist, construction, auto repair, farm and ranch and light industrial applications.
- • Stick, MIG and TIG In One Machine
- • Advanced Inverter Technology
- • Dual Voltage 120/230V
- • No Load Voltage 68V
- • Output Range 30 to 90 Amps, 140 Amps Peak (120V Power); 30 to 200 Amps (230V Power)
- • 30% Duty Cycle at 90 Amps (120V Power); 20% Duty Cycle at 240 Amps (230V Power)
Spec Sheet Owner's Manual